frquncy

[Qiaozhi]

The 110v light sockets in the USA and Australia make it difficult to reach a higher state of consciousness to achieve the revelations of LRL.

I think you meant to say unconsciousness.
If no success can be found with 240V, we could always try a 3-phase supply.

However, joking aside ... I don't think mesy64 is understanding this sarcasm. So we should make it clear that we do not believe there are any frequencies that would be useful for his purposes. The whole idea is complete nonsense, and is based on false pseudo-science, whether it is 50kHz, 50Hz, 123456Hz (or who cares), as all of these will give the same effect ... nothing.

[J_Player]

Sure , mouth to mouth reanimation and here i am.



All LRL´s are working Qiaozhi, this is a pleonasm
I did have revelations and your gold-frequency experiment was really useful: the right schematic doesn´t seem to belong to the world of simple mortals.
I´m thinking about selling the schematic (blurry as i only was able to see it for a short time) for 19999,99 £ (just for you), you will have already noticed that for such rare near-heaven schematics is is quite a bargain.Of course some components are concealed in black empty-filled cylinders, so difficult to copy...
If you are interested just let me know and i will register under a new name.

regards,
Fred.


Originally posted by Qiaozhi
That is too expensive for a blurry schematic with some parts hidden by epoxy.
I hope you're not turning into a money grabbing scammer.

Did you do the experiment with 60Hz mains voltage? I've heard that 50Hz can give better results. Maybe you would like to try again?



Originally posted by mesy64
What is the frequency of radio waves received??

Everybody knows the frequency doesn't matter with a broadband noise locator.
It is the voltage that makes the difference.

The 110v light sockets in the USA and Australia make it difficult to reach a higher state of consciousness to achieve the revelations of LRL.
Reports of both 50 Hz and 60Hz electrocutions from around the world prove nobody discovered the secret LRL revelations at 110v.
It becomes apparent that Fred inadvertently noticed a star in his 220v light socket, along with other things that are found in distant galaxies.
When he reached into this 220v socket he was readily launched past nirvana, most likely through a worm hole to deep space of revelations.

These revelations are certainly worth 19999,99 £.
But since we have discovered the frequency is not important, the remaining revelation is easy to determine by examining the LRLs that have been reverse engineered.
Have you ever wondered why epoxies were poured into empty cavities?

The epoxy is the secret !!!
There you have it.
Of course, there are millions of epoxy formulas, and only a very few will work to locate treasures at long distance.
The secret epoxy has an extract of the substance which gold DNA produces to fight oxidation.
Your broadband receiver will locate only when the exact balance of this substance is mixed in the epoxy.
But, the most important question...
Where can you find this long range epoxy?
The answer is also specified in the 220v revelations.

But the answers don't come cheap.
19999,99 £ is a small price to pay for the secret "dead socket scrolls"
A sample of what you get for your 19999,99 £:



... and there's a lot more where that came from....


Best wishes,
J_P

[mesy64]

Dear friends, you are a recipient of vlf waves emitted by the gold received in space ?
What is the frequency of radio waves received??
please help me

[Qiaozhi]

I´m thinking about selling the schematic (blurry as i only was able to see it for a short time) for 19999,99 £ (just for you), you will have already noticed that for such rare near-heaven schematics is is quite a bargain.

That is too expensive for a blurry schematic with some parts hidden by epoxy.
I hope you're not turning into a money grabbing scammer.

Did you do the experiment with 60Hz mains voltage? I've heard that 50Hz can give better results. Maybe you would like to try again?

[Fred]

I see you've recovered from the gold-frequency experiment.

Sure , mouth to mouth reanimation and here i am.

Did you have any revelations during your near-death experience, such as a vision of a complete working LRL schematic?

All LRL´s are working Qiaozhi, this is a pleonasm
I did have revelations and your gold-frequency experiment was really useful: the right schematic doesn´t seem to belong to the world of simple mortals.
I´m thinking about selling the schematic (blurry as i only was able to see it for a short time) for 19999,99 £ (just for you), you will have already noticed that for such rare near-heaven schematics is is quite a bargain.Of course some components are concealed in black empty-filled cylinders, so difficult to copy...
If you are interested just let me know and i will register under a new name.

regards,
Fred.

[Qiaozhi]

Hi MFC,
This is the remote sensing forum, and here in this special and somewhat magical world, when someone asks for a metal frequency is because they believe underground metals transmits on their own a signature signal on a (magical) frequency that you just have to receive to know where is buried the metal.
I think everything can happen in the Rs forum.I guess this is why i am here too...

I see you've recovered from the gold-frequency experiment.

Did you have any revelations during your near-death experience, such as a vision of a complete working LRL schematic?

[Fred]

Hi MFC,
This is the remote sensing forum, and here in this special and somewhat magical world, when someone asks for a metal frequency is because they believe underground metals transmits on their own a signature signal on a (magical) frequency that you just have to receive to know where is buried the metal.
I think everything can happen in the Rs forum.I guess this is why i am here too...

[MFC]

Hello Mesy64 I am Maikel from Cuba, I had saw your ask about a table for Frequencies for VLF metal detectors, well this can vary a lot.

Example VLF detectors are aprox 6 -- 8 KHZ (Very low frequency VLF), these detectors are basically a trasmit and a receiver circuit with ability to ground balance and discimination.

The Pulse Induction metal detectors (PI) are working more low freq *** from 100 HZ to 1000 HZ (1KHZ), they are better in ground because lo lower frequencies penetrate more deep in ground.

Actually don't exist a table with these datas because between one and other menufacturer this can vary.

**Important, the response of gold and silver to determinate frequency is not exact, because somebodies say that a hight frequency is better for gold and silver that a lower frequency, I think this is not certainly true because the PI detectors work in more low frequencies that the VLF and however the PI detect the gold more Deep than a VLF machine. If you see carefully you will see the VLF is more hight freq than a PI. So you may be say why?

Well the PI detector have an specific feature that a VLF don't have and is the heavy Magnetic Field emmited trought the search coil, is a brutal power of emit voltage wave compared with a more poor emition of a VLF detector. This hit the gold or silver object with more energy and more Deep and generates too a stronger Eddy Current more easy to detect for the electronic of the PI machine.

If you want to have a Good PI machine you must get a short delay timefor receiving, a hight Q factor and low capacitance coil as possible, Good receiver calibration and sensibity and work between 100 HZ and 1000 HZ depending of the mineralization of the soil. I believe that Deepers 8AT is perfect PI machine and easy to make.

good look

Maikel

[Fred]

Maybe I a saw ring on the hand from wife of Dr. hung?

Best wishes,
J_P

That would explain why his lrl´s beeps a lot and mine don´t ....

[J_Player]

Hello dear Player, J ...
you are so smart ! It IS a star...Like you! A nuclear reactor!
Fred didn´t like gold, and said rings made interferences when tuning his LRL´s...In fact we have no gold at all in the house because of interference, he found plenty of gold everywhere but never bring it at home for this reason, he preferred to let it into the ground where he knows his LRL will find it ...
So it must be another hands that you have seen with gold rings ??!! ...

Maybe I a saw ring on the hand from wife of Dr. hung?

Best wishes,
J_P

[Fred]

Hi Fred,
Excellent nuclear bomb.
It looks like maybe better than a nuclear bomb... maybe a star.
Did you find it in the light socket?
Question... Is this 50 Hz or 60 Hz star?
Maybe Fred don't answer any more.

Ok Fred's wife...
I saw the beautiful rings on your fingers in other post.
Did Fred stop moving after putting finger in socket to recover star?
Or did he stop moving after massive gold ion migration?
Just wondering.

Best wishes,
J_P

Hello dear Player, J ...
you are so smart ! It IS a star...Like you! A nuclear reactor!
Fred didn´t like gold, and said rings made interferences when tuning his LRL´s...In fact we have no gold at all in the house because of interference, he found plenty of gold everywhere but never bring it at home for this reason, he preferred to let it into the ground where he knows his LRL will find it ...
So it must be another hands that you have seen with gold rings ??!! ...

[J_Player]

Here you go WM6, it´sfor you, but hurry up i am not going to hold it for long...




Hello mister Q, this is Fred´s wife writing.
He did what you said, now he´s not moving at all anymore, i am happy, no more wires, toasted components smell or transistors in bed, just wanted to give you a big thank you!

Hi Fred,
Excellent nuclear bomb.
It looks like maybe better than a nuclear bomb... maybe a star.
Did you find it in the light socket?
Question... Is this 50 Hz or 60 Hz star?
Maybe Fred don't answer any more.

Ok Fred's wife...
Did Fred stop moving after putting his finger in the socket to recover a star?
Or did he stop moving after massive gold ion migration?
Just wondering.

p.s. -- I saw your beautiful red hat and evening gown in Fred's other post.
but no gold rings on your fingers....

http://www.geotech1.com/forums/showpost.php?p=122238&postcount=44

Best wishes,
J_P

[Fred]

No problem Fred, give me a nuclear bomb.

Here you go WM6, it´sfor you, but hurry up i am not going to hold it for long...

You can easily prove this by sticking a screwdriver into a mains outlet and touching the metal part with your finger. I guarantee you will see flashes of gold. Try it - you might even get to like it.

Hello mister Q, this is Fred´s wife writing.
He did what you said, now he´s not moving at all anymore, i am happy, no more wires, toasted components smell or transistors in bed, just wanted to give you a big thank you!

[Qiaozhi]

I tried this as a little kid and your right - 60 hz USofA and hurts like hell.

But the dowsing freq I mentioned for gold is 50 Khz. slight 3 orders of magnitude difference with 50 hz! Now as a one of Carl's gurus maybe you don't realize there is a difference.
Goldfinder

Shocking ... isn't it?

[goldfinder]

5 Khz vs 50 Khz

I have seen both. The derivation using atomic weights and some other physics that I saw derived 50 Khz . However, it you are in the coat hanger ideomotor camp a bent coat hanger with any frequency or none works just as well.

For myself, I think there is something in this atomic frequency for gold or other mineral location ideas but don't know what it is. I have dowser friends that swear by this stuff but I have never seen them recover anything. So there is a disconnect between concepts they believe in and making it work. I am sensitive to various vibrations and I can pick up a mineral like gold or silver and feel different pulsations coming from the two samples. But without touching it I don't get anything.

And those who just make fun of the whole idea don't help in trying to understand what is going on. As my old German friend use to say "the sneer is the devils smile".

Our nervous systems are marvelously sensitive to subtle energies and some people are much more sensitive than others. This is a well proved physiological fact. And some are really aware of their sensitivities.

Goldfinder