Testing

[Morgan]

PD test

In the video I did not see you switch off the ferrite circuit, when you got closer to the target, so that you could pinpoint with the omega coil.

Am I missing something here?

Hello

PD detection consist in two diferent behavior,when using Omega+Ferrite:

1- When detection of target start a few meters distance , always need triangulation N,S,E.W, for better understand where is the object.
If object is producing big signal(big object,or very conductive),the PD detect more far away but this signals are flouting(flying) over and around the spot,and when i lower PD to groud near the object,it always cut the signal.You can see in the film,it cut the signal when i lower PD,and then start beeps when i pinpoint. This objet is buried maybe 15 or 20 cm,becouse TESORO MD detect,and it sounds like one coin.

2-If objet is more near the surface,PD will pinpoint very easy when the Omega is touching the ground over the spot.
But if object is very deep,the PHENOMENON is flying around,can be detected meters away ,i find his direction very easy(a lot of continuous beeps),but when lower PD near target, the signal desapear,so i need to scan the place with my NEXUS.
So,always very small objects and near the surface are easy to locate and pinpoint with PD.

[Esteban]

Hello

PD detection consist in two diferent behavior,when using Omega+Ferrite:

1- When detection of target start a few meters distance , always need triangulation N,S,E.W, for better understand where is the object.
If object is producing big signal(big object,or very conductive),the PD detect more far away but this signals are flouting(flying) over and around the spot,and when i lower PD to groud near the object,it always cut the signal.You can see in the film,it cut the signal when i lower PD,and then start beeps when i pinpoint. This objet is buried maybe 15 or 20 cm,becouse TESORO MD detect,and it sounds like one coin.

2-If objet is more near the surface,PD will pinpoint very easy when the Omega is touching the ground over the spot.
But if object is very deep,the PHENOMENON is flying around,can be detected meters away ,i find his direction very easy(a lot of continuous beeps),but when lower PD near target, the signal desapear,so i need to scan the place with my NEXUS.
So,always very small objects and near the surface are easy to locate and pinpoint with PD.

True. When you're near the target, the signal dissapear, don't know if the body interacts and "robs" the "phenomenon". Also was described for me.

[Morgan]

The original PD

In the video I did not see you switch off the ferrite circuit, when you got closer to the target, so that you could pinpoint with the omega coil.

Am I missing something here?

THE ORIGINAL PD FROM ALONSO, as the 3 position switch,and he told to the owner:

Position to FRONT, it will find only precious metals. (its only directional ferrites working)

Center Position- Desactivated.

Position to back- It will detect most of conductive metals at distance.


So ,not exist in this device one short range pinpointer. Acording Alonso,this PD is a complete LRL,all non ferrous metals,and only precious metals.

[Morgan]

Esteban 20 years around the PHENOMENON

True. When you're near the target, the signal dissapear, don't know if the body interacts and "robs" the "phenomenon". Also was described for me.

Yes,Esteban,and i think i understand why this happens.
I think its becouse PHENOMENON (TRANSMITION OF SIGNAL WAVES) overload PD RECEIVER,
if you try LRL device near TV,it happens the same,with MINEORO the same...

[Geo]

Yes,Esteban,and i think i understand why this happens.
I think its becouse PHENOMENON (TRANSMITION OF SIGNAL WAVES) overload PD RECEIVER,
if you try LRL device near TV,it happens the same,with MINEORO the same...

Hi.
Connect a meter at the out of demodulate diode to see if it is overload or no. Also you can connect a digital voltmeter.
My ferrite receiver works near TV, the same when i had the PDC-210

[hung]

True. When you're near the target, the signal dissapear, don't know if the body interacts and "robs" the "phenomenon". Also was described for me.

This happens for small objects, but it's not the main cause for lack of pinpointing.
The fields around the object are pulsed. There's a void around it which makes the emanated field become 'doughnut' shape.

[detectoman]

hey hung and morgan, i think the lrl is how one light beam, only far away can iluminate, near no
oigan hung y morgan yo creo que el haz de deteccion de un lrl es como un faro de luz que no puede iluminar a lo cercas sino que lanza la luz hacia lo lejos, por eso al acercarse al lugar donde esta el objeto, no puede cubrir ese plano de deteccion ya que lo lanzo hacia adelante
el haz de deteccion de un lrl es como una luz del lazer pero con un cono circundante, en el centro es mas potente, y en la periferia es mas debil, y se puede enfocar o se puede perder el punto de enfocamiento igual que una lampara
he alli lo que algunos no entienden ademas los objetos enterrados tienen diferentes emisiones , tres principales, tambien diferencian esas emisiones o radiaciones de acuerdo al metal que hay enterrado y como esta conformado, suelto en una caja, tipo de tierra, humedad, etc
unos lrls son mejores en ciertos terrenos que en otros
esa es la idea
un abrazo lrlsman

[detectoman]

i'm only theoric, imnt expert in build circuits, one day i show one sample of my rustic work
best whises
dman

[Morgan]

PD

Hi.
Connect a meter at the out of demodulate diode to see if it is overload or no. Also you can connect a digital voltmeter.
My ferrite receiver works near TV, the same when i had the PDC-210

This depends on size of TV...

[takhslambos]

MINEORO DCH 85 MANUAL

.....please i need the manual of mineoro dch 85m in english.can you send it to me???or can you tell me how can i used it????i think is the first model the old one.hade two dotons on the side ...one is write zero and turned 90 degrees the other ir write( min normal max and off).and above of this two bottons is one switcher( on off).at the back of the machine is two red lambs one botton write( N 4 6).also above of the machine next to the speeker is one black two positions botton.can you please tell what is all bottons are???who can i used the mineoro ?????THANKS......

[WM6]

?who can i used the mineoro ?????THANKS......

Very simple, you even do not need any manual.

DCH-85M work without batteries the same way as with battery.

This is very simple turn and go away LRL.

[folharin]

dch is garbage do not waste your time with him!

[LRLMAN]

DCH85-M

.....please i need the manual of mineoro dch 85m in english.can you send it to me???or can you tell me how can i used it????i think is the first model the old one.hade two dotons on the side ...one is write zero and turned 90 degrees the other ir write( min normal max and off).and above of this two bottons is one switcher( on off).at the back of the machine is two red lambs one botton write( N 4 6).also above of the machine next to the speeker is one black two positions botton.can you please tell what is all bottons are???who can i used the mineoro ?????THANKS......

Do you have any photo from this machine???

I know a red one from a friend and other one from Alonso and i have a lot images.

Greetings.

lrlman.

[LRLMAN]

DCH85-M

Do you have any photo from this machine???

I know a red one from a friend and other one from Alonso and i have a lot images.

Greetings.

lrlman.

Some images DCH 85-M

Machine made for Alonso.

saludos.

Greetings.

[Morgan]

DCH85 M

Do you have any photo from this machine???

I know a red one from a friend and other one from Alonso and i have a lot images.

Greetings.

lrlman.

maybe useless for small objects but nice LRL design.