Announcement

Collapse
No announcement yet.

Testing

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Only talking... Maybe you can't put all this big apparatus into a handle pistol, so is not practical here. If you work in oil company, don't know why you don't know about this spontaneous potential occurs in Earth causes by ores and oxidized metals...
    Hi Esteban,
    These are not the same as the isotope detectors used in oil well heads. The probes sent down an oil shaft are used to identify changes in the composition of the soil, in hopes of determining what kind of soil conditions and probablility of oil below. The gamma sensors built by the rocket scientists were designed to be used above ground. They are designed to be used for surveying a large area of land for minerals by using the detector on foot, in car, in airplane, or in a satellite. From foot distance or from satellite distance, the detector can pinpoint ore deposits up to 5000 feet deep below the surface. It has been used to locate petroleum deposits up to 10,000 feet deep.

    The early isotope detectors of the 1970s were bulky, taking the space of 4-5 cubic feet. But in the 1980s a portable version was built that was the size of a laptop computer of 4 inches depth which ran on rechargeable nicad batteries. It had a sensor head 1-1/2 inch diameter x 10 inch long connected by a cable 6 feet long. Most of the space inside this 1980s detector was taken by discrete logic chips used to discriminate and for counting and driving displays. Only a small high voltage section for the photomultiplier.

    If this same device was built today using modern display drivers, it could easily be built much smaller, maybe the size of a pistol detector, with the sensor head mounted inside.

    Best wishes,
    J_P

    Comment


    • Originally posted by detectoman View Post
      i cant say exackly what emisions, i know these for law of analogies, may be, energy elecricity and micro particulas ( ions ) in the subemisions, may be radiation, gas, field, magnetic electostatic static and others, all these can be detect for ideonus apropiate s detector
      so need very power rx, ics are inahabilited due to nearby of components, these derivate the interaccions in hig gain, may be, i m only teorically and study fenomens in general, not in minucious specifications
      may be too these anyone energy of treasure can be detect for human hig sensitivity and concentration
      jajaja or whit ideomotor, and wires in hands clear in optimes circumstances
      one man of mexico detect only whit palm of hands and discriminate gold or silver jajaja i not see these i look the report in page of hunters in internet buscadores de tesoros, but msn go out these group
      bye apologies for my bad english
      i am of new shoes whit my new pc congratulations me hahaha jajaja

      Congrats for the new PC!

      "Kill for gain or shoot to maim...
      But we dont need a reason
      "

      someone said...

      Comment


      • Testing

        Originally posted by Esteban View Post
        Only talking... Maybe you can't put all this big apparatus into a handle pistol, so is not practical here. If you work in oil company, don't know why you don't know about this spontaneous potential occurs in Earth causes by ores and oxidized metals...

        Regards

        Esteban
        hello Esteban

        Can you put this videos i sent to you ,in Rapidshare,for everybody to see ,you know better how to do this,thanks.

        After see this films,if someone still with doubts,this target and other targets still here for study phenomenon.
        Regards

        Comment


        • Originally posted by Morgan View Post
          hello Esteban

          Can you put this videos i sent to you ,in Rapidshare,for everybody to see ,you know better how to do this,thanks.

          After see this films,if someone still with doubts,this target and other targets still here for study phenomenon.
          Regards
          I put 2 days ago on megaupload with simple explanations for to download... nobody read?

          Comment


          • Originally posted by Esteban View Post
            I put 2 days ago on megaupload with simple explanations for to download... nobody read?

            http://www.geotech1.com/forums/showt...t=12144&page=2
            Wrong link i´m afraid.
            And no i didn´t see it.

            Comment


            • Originally posted by Fred View Post
              Wrong link i´m afraid.
              And no i didn´t see it.
              In the link of Geotech I post the 2 megaupload links.

              Comment


              • Originally posted by Esteban View Post
                I put 2 days ago on megaupload with simple explanations for to download... nobody read?

                http://www.geotech1.com/forums/showt...t=12144&page=2
                Originally posted by Esteban View Post
                In the link of Geotech I post the 2 megaupload links.
                I have not seen a link to the video. The one you've just supplied points to an old thread on Geotech, but again no link to a Youtube video.

                Comment


                • Originally posted by Qiaozhi View Post
                  I have not seen a link to the video. The one you've just supplied points to an old thread on Geotech, but again no link to a Youtube video.
                  I saw them but had no time to check the videos... the post is somewhere back in pile...

                  If I'll find that post I will link here...

                  Kind regards,
                  Max

                  "Kill for gain or shoot to maim...
                  But we dont need a reason
                  "

                  someone said...

                  Comment


                  • here it is:


                    it's post #125

                    Kind regards,
                    Max

                    "Kill for gain or shoot to maim...
                    But we dont need a reason
                    "

                    someone said...

                    Comment


                    • Megaupload links.

                      http://www.megaupload.com/?d=A7Q8AZIU

                      http://www.megaupload.com/?d=MDQLG7JG


                      Here the capture of page in wich was posted the above 2 links: (So, Geotech fails?)
                      Attached Files

                      Comment


                      • Thanks
                        Max´s info was OK,

                        About the videos,
                        Frankly if i didn´t knew were the target was,i would have dificulties to find it only with the beeping ...

                        Comment


                        • PD tests

                          Originally posted by Fred View Post
                          Thanks
                          Max´s info was OK,

                          About the videos,
                          Frankly if i didn´t knew were the target was,i would have dificulties to find it only with the beeping ...
                          Becouse of this dificulty,i put one stone as reference to target, when make the films...

                          Comment


                          • Originally posted by Morgan View Post
                            Becouse of this dificulty,i put one stone as reference to target, when make the films...
                            This is what is bothering me, if the PD was working really well the stone would not be necessary...

                            Comment


                            • Originally posted by Morgan View Post
                              Becouse of this dificulty,i put one stone as reference to target, when make the films...
                              In the video I did not see you switch off the ferrite circuit, when you got closer to the target, so that you could pinpoint with the omega coil.

                              Am I missing something here?

                              Comment


                              • Originally posted by Qiaozhi View Post
                                In the video I did not see you switch off the ferrite circuit, when you got closer to the target, so that you could pinpoint with the omega coil.

                                Am I missing something here?
                                New idea on RSP forum.

                                Comment

                                Working...
                                X