Originally posted by Morgan
View Post
Announcement
Collapse
No announcement yet.
ALONSO PD MISSION ACCOMPLISHED V1,V2
Collapse
X
-
DCH85
it is fine if it is detect your hand energy too, this are the indicators that enter in resonance,now need to make field tests, see results.Originally posted by abdou2014 View Postwhen my LRL did not want to stabilize with TDA, I removed the circuit from the middle lm741 and I connected the tda with another circuit, now it is stable, and i detect a flat metal at 3 cm, I don't know if it is sufficient as a result for the phenomenon ?
About the TDA7000 the 100K pot. work as a gain for the radio, and the vari. cap. 10-75pf as the one who need to adjust for the Phenomenon, In the Esteban schematic I see the 1M pot. is the receiver gain that you can use as Tuning and the 100k in the radio for Fine Tuning.
This antennas configuration are not very important, mine use a eletron ring (it can be silver or gold) with some turns of wire for resonate(each metal element vibrate at specific frequency) and it is connected as the image on the left you put in thread,but can be each pin of the coil wire on each side of the loop antenna and only one pin of the antenna connect to TDA,results are the same,all configuration antennas must be allways open Loop type,never closed loop,I try this way with bad results, also the noble metal sample no need to be ring shape,you can use a kind of bar and wind the wire turns there as Esteban teach how to do.
Comment
-
DIAMOG-79 LRL
Hi,Originally posted by abdou2014 View PostThank you very much Mr Morgan .
someone here know something about this LRL ?
Comment
-
DCH85 modified
here a modified DCH with other type of gold chamber for eletrostatic resonance(using gold leaf in between two poles anode and catod,mineoro theory) and TDA 7000 for upgrade, one of the finds was old boton made of low silver alloy and the second target was out of the range for the conventional metal detector to pinpoint , it could be very deep becouse this field was worked deeply many years ago.Originally posted by abdou2014 View PostYes i think too , thank you for the correction
I forgot, the circuit is only the esteban's beep generator, it is weird with less component it is
sensitive ?
I still haven't understood how to configure the coil with sample ?
Comment
-
Originally posted by Morgan View Posthere a modified DCH with other type of gold chamber for eletrostatic resonance(using gold leaf in between two poles anode and catod,mineoro theory) and TDA 7000 for upgrade, one of the finds was old boton made of low silver alloy and the second target was out of the range for the conventional metal detector to pinpoint , it could be very deep becouse this field was worked deeply many years ago.
https://www.youtube.com/watch?v=r3xPvcYk7kE&t=23s
Morgan , can you make only front Fotos from near Head Sensor , not understood image details from Video .
Comment

Comment