Announcement

Collapse
No announcement yet.

ALONSO PD MISSION ACCOMPLISHED V1,V2

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Originally posted by Morgan View Post
    And the adj. Cap, C1 (10-70pf)of the radio it will be used to adjust for the correct frequency yo locate the gold,
    T
    Morgan, here C1 maybe CV1 ?

    Comment


    • Yes i think too , thank you for the correction

      I forgot, the circuit is only the esteban's beep generator, it is weird with less component it is

      sensitive ?

      I still haven't understood how to configure the coil with sample ?
      Attached Files

      Comment


      • PDK-3

        Originally posted by humhum View Post
        Morgan, here C1 maybe CV1 ?
        yes

        Comment


        • DCH85

          Originally posted by abdou2014 View Post
          when my LRL did not want to stabilize with TDA, I removed the circuit from the middle lm741 and I connected the tda with another circuit, now it is stable, and i detect a flat metal at 3 cm, I don't know if it is sufficient as a result for the phenomenon ?
          it is fine if it is detect your hand energy too, this are the indicators that enter in resonance,now need to make field tests, see results.

          About the TDA7000 the 100K pot. work as a gain for the radio, and the vari. cap. 10-75pf as the one who need to adjust for the Phenomenon, In the Esteban schematic I see the 1M pot. is the receiver gain that you can use as Tuning and the 100k in the radio for Fine Tuning.

          This antennas configuration are not very important, mine use a eletron ring (it can be silver or gold) with some turns of wire for resonate(each metal element vibrate at specific frequency) and it is connected as the image on the left you put in thread,but can be each pin of the coil wire on each side of the loop antenna and only one pin of the antenna connect to TDA,results are the same,all configuration antennas must be allways open Loop type,never closed loop,I try this way with bad results, also the noble metal sample no need to be ring shape,you can use a kind of bar and wind the wire turns there as Esteban teach how to do.

          Comment


          • Thank you very much Mr Morgan .

            Comment


            • DIAMOG-79 LRL

              Originally posted by abdou2014 View Post
              Thank you very much Mr Morgan .
              Hi,

              someone here know something about this LRL ?

              Comment


              • DCH85 modified

                Originally posted by abdou2014 View Post
                Yes i think too , thank you for the correction

                I forgot, the circuit is only the esteban's beep generator, it is weird with less component it is

                sensitive ?

                I still haven't understood how to configure the coil with sample ?
                here a modified DCH with other type of gold chamber for eletrostatic resonance(using gold leaf in between two poles anode and catod,mineoro theory) and TDA 7000 for upgrade, one of the finds was old boton made of low silver alloy and the second target was out of the range for the conventional metal detector to pinpoint , it could be very deep becouse this field was worked deeply many years ago.

                Comment


                • congratulations, it's good LRL .

                  Comment


                  • Originally posted by Morgan View Post
                    Hi,

                    someone here know something about this LRL ?

                    https://www.youtube.com/watch?v=tTs4tJIVWtc

                    View is so like from Mineoro FG 79 Circuit .

                    Comment


                    • if so, it is another mambo jambo snake oil magic box, unless they upgrade the circuits...

                      Comment


                      • Originally posted by Morgan View Post
                        here a modified DCH with other type of gold chamber for eletrostatic resonance(using gold leaf in between two poles anode and catod,mineoro theory) and TDA 7000 for upgrade, one of the finds was old boton made of low silver alloy and the second target was out of the range for the conventional metal detector to pinpoint , it could be very deep becouse this field was worked deeply many years ago.

                        https://www.youtube.com/watch?v=r3xPvcYk7kE&t=23s

                        Morgan , can you make only front Fotos from near Head Sensor , not understood image details from Video .

                        Comment


                        • yes,tomorow,
                          it is a resonance chamber with gold leaf in between two poles,one connected to same pin as the antenna and the other to GND circuit

                          near the antenna is the TDA circuit

                          Comment


                          • you need to cut the antenna for more sensitivity, I made tests,and it work better

                            Comment


                            • I have two type Photos from Mineoro sensor which is best , and How is correct connection
                              of '' +'' ''-'' and to Leaf .

                              Org. Sensor and Greek Sensor ;
                              Attached Files

                              Comment


                              • Coil info

                                Morgan ,Please info for L1 (local OSC) , Tours , Diameter , Wire diameter , or
                                how many nH ?

                                Comment

                                Working...
                                X